Athome Industries Co.,Ltd
Call us on:+86-755-2970-6881  E-mail: athome10@nuohuagroup.com
News
Home > News > Content
Silicone Baby Bibs Causes Of Tearing
Athome Industries Co.,Ltd | Updated: Sep 20, 2017

Silicone Baby Bibs Causes of tearing
As we all know, Silicone Baby Bibs tear, pull bad and so on many factors, in addition to human phenomena in their respective work environment which will be a different problem, so it also led to a lot of consumer friends do not like the use of Silicone Baby Bibs reasons One, such as our common use of silicone mobile phone sets, may be inadvertently encountered when the sharp things can easily be drawn out of a mouth, and this is one of the important reasons for consumers to worry about, can not touch sharp weapon , Can not pull over and so on, but any Silicone Baby Bibs are not fully advantage, have their own advantages and disadvantages, just to see how you use the right and maintenance fills, that for tearing, you do it The
Speaking of tearing phenomenon, it had to Silicone Baby Bibs manufacturers from the source of production, tearing phenomenon in the manufacturers there are many reasons, such as the reasons for raw materials may lead to the selection of raw materials above the general material and high tensile material will appear Two kinds of effects, so the quality of Silicone Baby Bibs will be with different materials and different quality and tear resistance, of course, in the production process if there is not enough experience to control the curing, naturally also to no avail, so in the molding process Among them, the time control is very important, such as product curing time may lead to too long tea farmers may be too brittle, inadvertently will be torn, while cutting edge trim if not trimmed, it may lead to the product in the follow-up It is easy to be torn!
What issues do you need to pay attention to for the tearing of Silicone Baby Bibs purchased by consumer friends? First of all recommended in the procurement to identify the distinction between material and product quality problems, Silicone Baby Bibs the most prominent advantage is the flexibility, good quality products to see the elastic pull, stretch, soft and resilient so buy more time to see the flexibility of the product Judgment, high transparency of the basic products are high tear. In the purchase of transparency products can be judged, the hardness is to mention whether the product is anti-tear phenomenon, it belongs to the Silicone Baby Bibs rebound and tensile deformation required when the required force, hard and soft is also a way to identify the quality. So at the time of purchase to carefully observe the appearance of the product above whether there is a small gap, if the purchase may be in the practical process of wear and tear were torn in the normal use of the case do not try to touch with sharp things to prevent rupture!
How does Silicone Baby Bibs control and prevent this phenomenon in the production process?
  1, the most common reason is still mainly caused by the staff of the manipulation method, generally in the production process Silicone Baby Bibs manufacturers will be curing time locked in a time, mold time control can effectively prevent the emergence of product changes Crisp soft phenomenon, so generally thrown up this situation, the first staff from the look for the reasons!
2. Mold design is not fair and Silicone Baby Bibs production structure is not fair. Product structure or mold design is not fair, in the production of mold products caused by fracturing, it is recommended to die processing or mold structure to be improved, will be too thin place slightly thicker, slightly lower corner of the corner and so on.
3. The first is the production of the problem, the molding process when the temperature is too high and too long, resulting in product brittle, the second vulcanization of the wind is not too long time. Material problems, materials lead to Silicone Baby Bibs brittle or hardened the main reason, the material itself is not good material, resulting in tear strength is not up to standard. It is recommended to use the superior material production and processing, in the production of special products with image image glue production, so as to achieve tear strength requirements.

Product Categories

Fast Track

  • Feedback
    Athome Industries Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: Unit 625~631 Max Smart Commercial center, No782 Xixiang AVE, Baoan district, shenzhen, China
    Tel: +86-755-2970-6881
    Fax: +86-755-2970-6882
    E-mail: athome10@nuohuagroup.com
© Athome Industries Co.,Ltd